Nail cutting dies
Working area made of tungsten carbide, other parts made of steel.
INTRODUCTION
Nail Cutters Dies Details

 Working area made of tungsten carbide, other parts made of steel.  
A set of shaped cutters strike the other end of the wire. This cutter forms the point of the nail and at the same time cut the nail from the rest of the wire.Making nails from copper, stainless steel, aluminum, iron, zinc and many more.

Grade for carbide nail tools
Grade Density Hardness TRS Application recommened
g/cm3 HRA N/mm2
YG20 13.45-13.65 84 2480 Medium grain,for non-standard dies and moulds,
cold heading and punching dies.
YG20C 13.40-13.60 83.5 2680 Coarse grain,for making stand parts,bearing,tools profession cold moulds.And for dies and moulds making screws
YG22C 13.3-13.50 83 2850 Coarse grain,for nut forming dies and high impact resistance
forging dies.

Nail cutter dies drawing:

Carbide nail cutter drawing and size:

 
Type Size(mm)
A B S H h c
BT01 13.00 16 5.7 10-20 2 75
BT02 13.00 17 7.7 10-20 2.5 75
BT03 16.40 19.3 7.7 10-20 2.5 75
BT04 18.00 21.9 6.9 10-20 2 75
BT05 18.60 23 8.8 10-20 2.7 75
BT06 18.90 24 10.6 10-20 2.5 75
BT07 10.00 13 5.6 10-20 1.2 90
BT08 13.00 17 9 10-20 2.3 75
BT09 14.50 20 10 10-20 3 75
BT10 18.00 23.5 10.5 10-20 2.3 75
BT11 19.00 25.8 12.5 10-20 4 75
BT12 12.00 16 9 10-20 2.5 75
BT13 17.00 21 10 10-20 2 90
BT14 18.00 22 9 10-20 2.6 90
BT15 20.00 24 11 10-20 2.6 90
BT16 13.00 18.5 9 10-20 2.5 90
BT17 19.00 21 10 10-20 2.5 90
BT18 9.00 11 5.5 10-20 2 90
BT19 18.00 20 9 10-20 2.5 90
BT20 12.70 15.5 5.7 10-20 2.2 75
BT21 12.80 16.1 7 10-20 2.5 75
BT22 14.00 17.5 7.7 10-20 2.8 75
BT23 16.00 20 7.6 10-20 2.8 75
BT24 18.20 21.9 6.3 10-20 1.8 75
BT25 17.30 22 8.9 10-20 3 75
BT26 18.50 24 10.2 10-20 3.5 75

Other products